VALVOLINE INC. -- ALL FLEET PLUS SAE 15W40 MOTOR OIL  -- 9150-00-186-6705
<pre>=====================  Product Identification  =====================

Product ID:ALL FLEET PLUS SAE 15W40 MOTOR OIL
MSDS Date:03/20/1989
FSC:9150
NIIN:00-186-6705
MSDS Number: BKHHF
=== Responsible Party ===
Company Name:VALVOLINE INC.
Address:3499 DABNEY DR.
Box:14000
City:LEXINGTON
State:KY
ZIP:40512
Info Phone Num:(606) 268-7000
Emergency Phone Num:(800) 274-5263
CAGE:KO528
=== Contractor Identification ===
Company Name:VALVOLINE INC.
Address:3499 DABNEY DR.
Box:14000
City:LEXINGTON
State:KY
ZIP:40512
Phone:(606) 268-7000
CAGE:KO528
Company Name:VALVOLINE OIL CO
Address:3499 BLAZER PKY
Box:14000
City:LEXINGTON
State:KY
ZIP:40512
Country:US
Phone:606-357-7206 / 800-274-5263
CAGE:72527

=============  Composition/Information on Ingredients  =============

Ingred Name:PETROLEUM OIL, HYDROTREATED HEAVY NAPHTHENIC DISTILLATE
    (PETROLEUM), PETROLEUM DISTILLATES, MINERAL OIL
CAS:64742-52-5
RTECS #:PY8035000

=====================  Hazards Identification  =====================

Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:YES
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:EYES/SKIN/INGESTION: IRRITATION.
    INHALATION: BREATHING DIFFICULTY.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:EYES/SKIN/INGESTION: IRRITATION. INHALATION:
    BREATHING DIFFICULTY.

=======================  First Aid Measures  =======================

First Aid:EYES: FLUSH W/LARGE AMOUNTS OF WATER. SKIN: THOROUGHLY WASH
    W/SOAP & WATER. INHALATION: REMOVE TO FRESH AIR. ADMINISTER OXYGEN
    & GIVE ARTIFICAL RESPIRATION IF BREATHING HAS STOPPED. KEEP WARM &
    QUIET.  INGESTION: DON'T INDUCE VOMITING. NEVER GIVE ANYTHING BY
    MOUTH TO AN UNCONSCIOUS PERSON. OBTAIN MEDICAL ATTENTION IN ALL
    CASES.

=====================  Fire Fighting Measures  =====================

Flash Point:>420F
Extinguishing Media:REGULAR FOAM, CO2, OR DRY CHEMICAL
Fire Fighting Procedures:WEAR SCBA/FULL FACEPIECE OPERATED IN POSITIVE
    PRESSURE DEMAND MODE. WATER/FOAM MAY CAUSE FROTHING WHEN SPRAYED
    INTO HOT CONTAINERS.
Unusual Fire/Explosion Hazard:USE OF WELDING OR CUTTING TORCH ON OR
    NEAR DRUM MAY CAUSE PRODUCT OT IGNITE EXPLOSIVELY.

==================  Accidental Release Measures  ==================

Spill Release Procedures:ABSORB LIQUID ON PAPER, VERMICULITE, FLOOR
    ABSORBENT, SAND, CLAY, EARTH, OR OTHER ABSORBENT MATERIAL. STOP
    SPILL AT SOURCE/DIKE AREA/PUMP LIQUID TO SALVAGE TANK/SHOVEL INTO
    CONTAINER. WEAR PROTECTIVE	EQUIPMENT OR EVACUATE AREA.

======================	Handling and Storage  ======================

Handling and Storage Precautions:DON'T TRANSFER TO UNLABELED CONTAINER.
    DON'T USE CUTTING/WELDING TORCH ON THIS CONTAINER (EVEN EMPTY).
Other Precautions:OBSERVE ALL HAZARD PRECAUTIONS. EMPTY CONTAINERS OF
    THIS MATERIAL RETAIN PRODUCT RESIDUES (VAPORS, LIQUID, OR SOLID) &
    MAY BE HAZARDOUS. AVOID CONTACT W/STRONG OXIDIZING AGENTS.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:AS REQUIRED
Ventilation:AS REQUIRED
Protective Gloves:AS REQUIRED
Eye Protection:AS REQUIRED
Other Protective Equipment:NORMAL WORK CLOTHING COVERING ARMS & LEGS.
Work Hygienic Practices:REMOVE/LAUNDER CONTAMINATED CLOTHING BEFORE
    RE-USE.
Supplemental Safety and Health

==================  Physical/Chemical Properties  ==================

Vapor Density:>AIR
Spec Gravity:0.881
Evaporation Rate &amp; Reference:SLOWER THAN ETHER
Appearance and Odor:CLEAR BRIGHT LIQUID, HOMOGENOUS SOLUTION

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS
Hazardous Decomposition Products:TOXIC MATERIALS SUCH AS CO2, CO, &
    VARIOUS HYDROCARBONS

====================  Disposal Considerations  ====================

Waste Disposal Methods:PREVENT RUN-OFF TO SEWERS, STREAMS OR OTHER
    BODIES OF WATER. DISPOSE OF IN ACCORDANCE W/LOCAL, STATE, & FEDERAL
    REGULATIONS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.